facebook_icon twitter_icon instagram_icon googleplus_icon youtube_icon rss_icon

Geekdom Reviewed

Season 3 Begins

Click here to view and listen

Download .MP3


With all the focus on time loops, is it possible that Doctor Geek and friends missed Star Trek’s Anniversary? Fear not!  Thanks to a little time travel, Future Mister Flask comes to the rescue.  Together with Future Geek our Doctor Geek gets to celebration the anniversary while the rest of the lab listens to an interview recorded especially for the occasion.


Andrew Fazekas, The Night Sky Guy, is also author of the book Star Trek The Official Guide to Our Universe: The True Science Behind theStarship Voyages.  To find out more about Andrew visit his website.


The citizen science website Zooniverse can be found here


The NASA commissioned Bonstell artwork can be found here


It turns out I know a guy, Karsten Agler - HP Ambassador & Technical Product Manager for Sprout to be precise.  So I managed to get invited over to HP Labs in Palo Alto, CA recently for a demo of their new Sprout computer.



I arrived at HP Labs on a fine Friday morning and I only got lost once on the way.  I managed to find the visitor’s parking area (and a spot therein) pretty easily.  Luckily, I arrived my standard level of fairly early, because I ended up waiting until the longest Benny Goodman song in history ended before I locked up my car and headed into the lobby.






Signing in was done via computer at the receptionist station.  All done with a touch screen.  You had to put who you were, what company you were with, who you were there to see, etc. That process generated a badge that one is supposed to wear the entire time one is beyond the badge-controlled sliding doors. (As this is HP labs, there was also a sign informing folks that no photography was allowed.)  I got said badge from the receptionist, clipped it onto my sweater, and sat in on of the various comfy chair dotted about.



While I was waiting for my escort, the largest order of pizza I have ever seen arrived.  Seriously.  It took the driver three trips for the pizza alone, and two of the bags were huge.  I’m guessing that HP is doing pretty well.



Once Karsten collected me, and I was in HP Labs proper, I had the opportunity to see the offices of the founders of HP, Hewlett and Packard themselves.  The offices have been kept just as those two gentlemen left them.  Even from this, it was easy to see how different those two must have been.  One of them had a bunch of change on the corner of their blotter, the other had a profusion of awards on a table, all evenly spaced out.  I would have loved to stay and look around a little longer, but I had somewhere to be.



Our next stop was the demo lab, and to get there we had to descend a few flights of stairs, deep into the depths of the building.  Except not really, as the building is built into a hill, so even though we had descended a couple of stories, we could have then gone outside at any level. Clever design!


The Sprout Demo lab itself was very interesting.  They had a lot of things about to use as part of the demo, such as a frog mask, a Styrofoam potato, shells, drawings, etc.  Several Sprouts lined the walls, with a few other computers scattered about. It looked like the sort of plce you’d hold a group demo, but for this it was just us.



The Sprout is, at its most basic, an all in one Windows box (the one I saw ran Windows 8.1) with a touch screen.   But it also has a shell just for the Sprout, so you can log directly into that, and thus bypass the Windows start screen if you like. (To see more specific specs, go here



Both the screen, and the mat/pad are touch screens.  The monitor part has ten touch points, while the mat has twenty.  Just enough to play a duet on the piano app if you want to.  In this scenario, the sheet music in on the monitor and the dual keyboards are on the mat.


The mat is connected to the computer with a magnetic USB.  A keyboard, mouse, and stylus all come with the computer.  



But you can also call up a digital keyboard on the mat.  The mat itself is thin enough that if you were to stick your hand under it, you could see where your fingers are pressing up from the top.  The stylus can be attached to the side of the monitor, and the keyboard and mouse can hang out pretty much wherever you want them to, as they are wireless.




HP is going for an immersive computing experience.  In this case, that experience deals with blended reality.  You can scan an item, say a starfish, and it creates a digital version that appears on the mat.  Half ghostly image, half photographic copy, that appears right underneath the item you’ve scanned.  That image can then be edited and interacted with.



Collaboration from a distance is possible using the MyRoom software for conferencing. You can actually conference a huge number of people together, and they don’t all need to be on Sprouts. If you are on a Sprout, you can show both the person and their mat in the conference.  You can create a collaborative environment where more than one person can work with the images on the mat at a time.



Their concept of blended reality started with a guy who was trying to improve the scanning workflow.  Historically, if you wanted to scan something you had to take your pages to the scanner, scan them, check the resulting scan on your computer, then get up and fix anything that was wrong.  God help you if you had to hand feed the whole stack.  With the Sprout, you can scan your document right there on the mat.  Then you can crop, sign, and email all in one place.  You can even load the document into Word as an editable document.  Then you could have it open on your monitor, and say Powerpoint open on the mat, edit the doc and stick it in your powerpoint.  All in one place.


I’ve done a fair amount of document scanning in my time, and just watching how quickly and easily my friend scanned in and manipulated a document...well, I was mightily impressed.


Apparently, HP is currently working on the possibility of a 3D scanning to printing workflow.  They have identified two areas of interest: scanning to share and scanning to print.  They hope to make both available in the near future.  Right now they have about 180 degrees of scanning but they are working on 360. Stronger, better, faster versions of the Sprout are on their way too, so I’m really looking forward to seeing what they come up with.  


The current computing environment shown in the demo is fascinating.  I can only imagine what the next steps might be.


...I want a Sprout now.


(I never did see where that pizza ended up, by the way.  It must be the real way they power HP Labs.)




Why is Doctor Geek’s Laboratory of Applied Geekdom called The Science from Fiction Podcast? Should it not be the Science from Science Fiction Podcast?  Well, by its very nature fiction must contain some story point, some element that does not exist in the world today.  If this element is explained in terms of magic, the story is classified as fantasy.  However, as Arthur C. Clarke’s third law states, any sufficiently advanced technology is indistinguishable from magic.  Therefore I believe all the wonders of fiction can be explained in terms of science.  To help illustrate this, I have enlisted the help of NY Times Best Selling Author Debbie Viguié.

In addition to providing the voice of Claire, the grant committee liaison, on Doctor Geek’s Laboratory, Debbie Viguié is the bestselling author of over two dozen novels including the Wicked and Crusade series co-authored with Nancy Holder.  She is the Patron Saint of The Supernatural.  While her fiction is very compelling, she is also no stranger to science.  In fact, she uses science to explain the magic of her Witch Hunt Series.

Debbie and I will explore fiction’s top ten uses of magic and attempt to discover the science within.

I should state at the outset that I live within walking distance of Maker Faire, and I have since it started (or so I gather.)  And yet, this was my first visit.  Once I knew it existed, I heard all about the crowds and such, and decided I didn’t want to deal with it.


This year, I decided to go anyway, darn it.  I was so very glad I did.


Maker Faire, it turns out, is basically a huge conglomeration of things I’m interested in.  Model steam trains? Yep.  How about food science? Of course!  Innovative music? Space Travel? Fabric arts? Robots? Indeed!  All that and more.  Seriously, check out the website and see for yourself. The variety is astounding.


We entered, walked past a huge flaming rose, and into the thick of things. There were some presentations that we’d considered attending, but we only went to one, and that one we found by accident.  While I listened to the Librarians Making Makerspaces presentation  my hubby took a turn around the building we’d found ourselves in.  He showed me a few things when I was done, and then we continued on.


And on.  And on.  I’d thought that we’d go for a few hours, then head back home.  That…was not what happened. There were so many interesting things to see and learn about!  I can see why this event lasts for more than one day.


Next year, we are definitely getting the whole weekend pass.  It was very difficult to talk ourselves into leaving this time, and I think that will help.  The promised crowds were most evident in the Expo Hall, but really weren’t that bad elsewhere.  Even then, we aren’t talking about Disneyland on the 4th of July crowds in the Expo Hall.  More like Disneyland on a Summer weekday.  FYI, if you are at all sensitive to noise, you may wish to give the building with the Tesla Stage in it a miss.  The room is dark, but there is a lot of competing loud noise in there.


Anyway, once we were done with the Faire proper, we hunted up the Maker Shed for a spot of shopping.  And that was where I found the shiny new Arduino Workshop by John Boxall.  This book just came out in May.  Obviously, I bought it…and a few other things.

So…I’ll be switching over to Arduino Workshop for my Arduino learning process.


Wish me luck!